Home > REGNER RSSB > REGNER RSSB Locomotives
(Details shown apply to the default selection)
Brand: RegnerGauge: 30mm or 32mmScale: G 1:22.5Power: Electric track powered
REGNER 72011 RSSB Henschel DG26 open cab diesel. The prototype was powered by a two cylinder Lanova 29hp engine with a 4 speed gearbox . The model is powered by a 18v five pole motor geared down for a prototypical slow speed with drive to both axles. The scale is 1:22.5 and the gauge is 30mm, but we can re gauge to 32mm if you wish. Please select your gauge in the box above. Hook and loop couplings are provided in the kit, but other alternative couplings are available. A side rod and crank set is also available for this locomotive.
We have now provided English instructions and extra parts to make this kit easier for you to build.
This loco is now available built by us and fitted with DT radio control. Powered by a 9.6volt pack of rechargeable AAA batteries to give the slow speed of the prototype. You may already have a suitable charger so this is available separately. Please note there may be a delay in dispatch if you choose any of the options above because of the extra work involved and the availability of the components.
Bodywork colour may differ to that shown.
Length: 150mm without couplings
Side rod set for RSSB Henschel Diesels£24.50
Loren Coupling 75050 (pair)£7.00
Plate Buffer 75036 (single)£6.80
Unpainted sitting figure 75100£3.50
Regner 75504 Diesel Horn£4.00
Garden Railways Limited